dust extraction arm providers have the advantages of small volume, large air volume, compact structure and easy to use. The dust removed from the dust extraction arm providers can be discharged directly into the bin which means it can fall directly onto the belt. The dust-containing gas enters the dust extraction arm providers from the lower part of the dust collector. After filtration by filter bag, the clean air is discharged by the induced draft fan for a period of time, and the dust on the filter bag gradually increases, causing the negative force of the filter bag to rise. Dust removal by dust collector is required. The dust collector works normally.

For dust extraction arm providers, the operating temperature depends on two factors, namely, the high acceptance temperature of the filter material and the gas temperature above the dew point temperature. The dust concentration at the inlet and outlet refers to the emission concentration of the dust collector, which is expressed in the same way as the dust concentration at the inlet and outlet. The size of the dust concentration at the inlet and outlet should be subject to the local request or the user's request. The emission concentration of the single pulse dust collector can generally reach 50g/Nm³ or less. The operating pressure of the single pulse dust collector is based on the static pressure value of the installation breeze machine before and after the dust collector and the position of the device, which is also designed by the dust extraction arm providers. The pressure loss of a single pulse dust collector refers to the pressure drop of the gas from the dust collector to the inlet and outlet, or the resistance.

The performance of dust extraction arm providers depends not only on the correct selection of filter bag materials, but also on the dust removal system. The surface of the filter bag skeleton in contact with the filter bag should be smooth and clean, and no welding scars, bumps and burrs are allowed. The daily operation of the single pulse dust collector is made of natural granite, which is machined into a circular curved plate, and is smooth and flat from the overall structure. The boiler desulfurization dust collector should pay attention to the load change of the host equipment, which will affect the performance of the dust extraction arm providers. The operation of a single pulse dust collector can be divided into two types: test run and daily operation. To prevent the friction damage of the filter cloth, the moving dust should not be directly rushed into the filter cloth. The single pulse dust collector can be used for the pneumatic conveying device to collect dust, although the air volume is less and the dust and the box requirements are not afraid of pressure, so the cylindrical shape is more. All solder joints on the filter bag skeleton in the dust collector skeleton should be welded.

dust extraction arm providers: When the dust-containing gas enters the dust collector from the inlet and outlet, it first encounters the inclined plate and baffle in the middle of the inlet and outlet, and the air flow turns to flow into the ash hopper. At the same time, the air flow speed slows down. Due to the inertia, the coarse particles in the gas directly flow into the ash hopper. What should I pay attention to before overhauling dust extraction arm providers?

1, the person in charge of the maintenance unit of the pulse dust collector manufacturer should be responsible for the stability of the maintenance of the pulse dust collector manufacturer, and hand over the task and stability measures to the maintenance personnel of the pulse dust collector manufacturer.

2, the person in charge of maintenance of the pulse dust collector manufacturer before the maintenance of the pulse dust collector manufacturer, it is necessary to organize the maintenance personnel of the pulse dust collector manufacturer to conduct a detailed inspection of the tools and equipment repaired by the pulse dust collector manufacturer to determine the stability and good.

3, where in flammable, explosive, toxic substances equipment, pipelines and other above the pulse dust collector manufacturer maintenance, need to cut off the power, insert the relevant parts of the blind plate, cleaning replacement and analysis and inspection qualified, the work is carried out by the workshop of the equipment.

4, for the overhaul project, after the maintenance work of the pulse dust collector manufacturer is ready, the maintenance preparation unit of the pulse dust collector manufacturer will notify the relevant departments in time, and check the preparation work of the pulse dust collector manufacturer's maintenance together with the maintenance department of the pulse dust collector manufacturer and the production workshop, and find the facilities, tools, stability measures that do not meet the maintenance requirements of the stable pulse dust collector manufacturer. Only after the relevant personnel are required to solve the problem within a time limit can construction be carried out.

dust extraction arm providers https://www.kaisenfilter.com/Suspended-Suction-Arm