1050106010701100 aluminum circle sheet, falling on 1000 collection, is between zero.1mm to 10mm thick. It carries all grades of the series: 1050, 1060, 1070 and 1100, which may be made into no longer handiest circle discs, however also sheets and coil rolls. As one of the maximum broadly used aluminum alloy products, those circle sheets are widely utilized in electronics, each day chemical substances, remedy, cookware, car elements and other deep drawing or spinning merchandise. Examples include non stick pots, stress pots, lampshades, water heater shells, stretching tanks etc.
1050 aluminum circle consists of Aluminum al: 99.50 silicon Si: < zero.25 copper Cu: < 0.05 magnesium mg: < 0.05 zinc Zn: < 0.05 manganese Mn: < 0.05 titanium Ti: < zero.03 vanadium V: < zero.05 iron Fe: zero.000 ~ zero.400 notice: single ≤ 0.03. It’s more potent than both 1060 or 1070 discs, for it has less aluminium within the content material. The chemical composition of 1060 is barely one-of-a-kind from that of 1050: Fe zero.35, Mn 0.03, Mg zero.03, Si 0.25, Zn zero.05, Ti 0.03, Cu five.Zero-6.Zero, Al above 99.6. 1060 aluminum circle is formed with the aid of including a small amount of copper element to pure aluminum. It has first rate forming and processing traits, high corrosion resistance, properly weldability and conductivity. In many cases 1060 and 1050 can be replacement for each different in software. Each are utilized in products with low strength requirements, inclusive of chemical units, sheet steel processing components, deep drawing or spinning concave vessels, welding components, heat exchangers, bell surfaces and plates, nameplates, kitchenware, decorations, reflective gadgets, and so on. 1070 is the softest of all: Cu: zero.04 Mn: zero.03 mg: zero.03 Zn: 0.04 Ti: zero.03 V: zero.05 al: 99.7.
1100 aluminum circle proves to be the strongest of 1050106010701100 aluminum circle sheet in either strength or corrosion resistance, containing Si + Fe: zero.95, Cu: zero.05-zero.20, Zn: 0.10, Mn: 0.05 and al: ninety nine.00. 1100 aluminum circle can't be strengthened through heat treatment; its strength is low, but it has precise ductility. After anodizing, the corrosion resistance can be further stepped forward and the stunning floor may be received.